Proper Build Techniques for Ponte Boro RDTA

The Ponte Boro RDTA by Orca Vape, in collaboration with MrJustRight1, is a highly anticipated rebuildable dripping tank atomizer that promises to deliver exceptional flavor and vapor production. To fully enjoy the potential of this innovative device, it is crucial to master the art of building and wicking. In this tutorial, we will guide you through the proper techniques to achieve optimal performance from your Ponte Boro RDTA.

First and foremost, it is essential to choose the right coil for your build. The Ponte Boro RDTA is compatible with a wide range of coil types, including single and dual coils. When selecting a coil, consider factors such as resistance, material, and diameter to ensure a perfect fit for your vaping preferences. Once you have chosen your coil, it is time to install it onto the build deck of the Ponte Boro RDTA.

To begin the building process, start by loosening the post screws on the build deck to create space for your coil. Carefully insert the leads of the coil into the designated post holes and tighten the screws to secure the coil in place. Make sure the coil is positioned evenly above the airflow slots to ensure proper airflow and heat distribution. Once the coil is installed, trim any excess wire and adjust the coil to eliminate any hot spots.

After successfully installing the coil, it is time to wick your Ponte Boro RDTA. Proper wicking is crucial for optimal flavor and vapor production, as it ensures efficient e-liquid delivery to the coil. To wick your RDTA, cut a strip of cotton that is slightly thicker than the coil diameter. Gently twist one end of the cotton strip to create a pointed tip, making it easier to thread through the coil.

Carefully feed the cotton through the coil, ensuring that it is snug but not too tight. Trim the excess cotton on both ends, leaving enough length to tuck the wicks into the wicking channels. It is important to fluff the ends of the cotton to promote better e-liquid absorption and prevent dry hits. Once the wicks are in place, saturate them with e-liquid to prime the coil and prevent any burnt taste during the initial firing.

With the coil installed and properly wicked, it is time to test fire your Ponte Boro RDTA. Gradually increase the wattage on your device to heat up the coil and check for any hot spots or uneven heating. Adjust the coil if necessary to ensure a smooth and even glow from the center outwards. Once you are satisfied with the coil performance, assemble the RDTA and fill the tank with your favorite e-liquid.

In conclusion, mastering the art of building and wicking is essential for maximizing the performance of your Ponte Boro RDTA. By following the proper techniques outlined in this tutorial, you can enjoy a flavorful and satisfying vaping experience with your RDTA. Experiment with different coil builds and wicking methods to find the perfect setup that suits your preferences. With practice and patience, you can unlock the full potential of the Ponte Boro RDTA and elevate your vaping experience to new heights.

Step-by-Step Wicking Tutorial for Ponte Boro RDTA

Today, we will be discussing the Ponte Boro RDTA by Orca Vape, in collaboration with MrJustRight1. This rebuildable dripping tank atomizer is a popular choice among vapers for its versatility and performance. In this article, we will provide a step-by-step guide on how to build and wick the Ponte Boro RDTA for optimal flavor and vapor production.

Before we begin, it is important to gather all the necessary tools and materials for building and wicking the Ponte Boro RDTA. You will need your preferred coil wire, cotton wicks, scissors, tweezers, and a screwdriver. Make sure to also have a stable work surface and good lighting to ensure a smooth building process.

To start, disassemble the Ponte Boro RDTA by unscrewing the top cap and removing the build deck. Take your coil wire and wrap it around a screwdriver to create a coil with the desired resistance. Once you have your coil ready, insert it into the build deck and secure it in place using the screws provided. Make sure the coil is positioned evenly and not touching any metal parts to avoid short circuits.

Next, trim the excess wire from the coil using your scissors and adjust the coil if necessary to ensure it is centered and aligned with the airflow slots. Once the coil is in place, pulse fire it to check for hot spots and make any adjustments needed to achieve an even glow from the inside out.

After the coil is properly installed and glowing evenly, it is time to wick the Ponte Boro RDTA. Take a strip of cotton and gently thread it through the coil, making sure not to pack it too tightly to allow for proper wicking. Trim the cotton to the desired length, leaving enough to tuck into the wicking channels on the build deck.

Carefully tuck the cotton into the wicking channels, ensuring that it is not blocking the airflow and allowing for efficient e-liquid absorption. Fluff the ends of the cotton slightly to promote better wicking and prevent dry hits.

Once the coil is built and wicked, reassemble the Ponte Boro RDTA and fill the tank with your favorite e-liquid. Allow the cotton to saturate for a few minutes before vaping to prevent any dry hits and ensure a smooth vaping experience.

In conclusion, building and wicking the Ponte Boro RDTA by Orca Vape / MrJustRight1 is a straightforward process that can greatly enhance your vaping experience. By following this step-by-step tutorial, you can achieve optimal flavor and vapor production from your RDTA. Remember to take your time and pay attention to detail to ensure a successful build every time. Happy vaping!